FAULT

CAUSE

SOLUTION

Unit does not operate

Unit not switched on.

No power to machine.

Switch unit on.

Plug in unit; check power cord connection at wall outlet.

Unit operating, but room not dry

Not enough time to dry.

Poor air movement in room.

Excessive moist air infiltration.

Allow more time for drying.

Increase air movement with air movers.

Reduce infiltration.

Unit continuously in defrost mode

Room temperature too low

Increase room temperature.

Pump does not function

Stuck float valve

Clean float valve shaft.

Unit collects too little water

Room air is dry.

Room temperature is too low.

Check humidity with hygrometer.

Increase room temperature.

Check filter and coils; clean as necessary.

If the problem you are experiencing is not listed here, call your local distributor or contact the
Dri-Eaz Service Department toll-free at 800-932- 3030.