<< Click to Display Table of Contents >> Owner's Manual > Transporting and Storage - DrizAir 1200

NOTICE: Handle the unit carefully. Do not drop, throw, or place the unit where it could fall. Rough treatment can damage this equipment and may create a hazardous condition or void warranty.

 

NOTICE: Handle the unit carefully. Do not drop, throw, or place the unit where it could fall. Rough treatment can damage this equipment and may create a hazardous condition or void warranty.

•Do not use or store near ignition sources, combustible gases, electric heaters or open flames.

•Do not expose the control panel to moisture, snow or rain.

•Store and transport securely to avoid any damaging impact to internal parts.

•Secure during transport to prevent sliding and possible injury to vehicle occupants

•Do not transport or store the unit on its front, sides or back. This will help to prevent any remaining moisture from escaping from the unit or flowing into areas outside the pump.

 

IMPORTANT: Be sure to purge the water from the pump reservoir before moving the unit. See the PURGE function under "How to use the control panel"

Note: The unit must be plugged in for the Purge function to operate.

1.Do not expose the control panel to moisture, snow or rain when transporting in uncovered vehicles.

2.Store and transport securely to avoid any damaging impact to internal parts.